EasyManua.ls Logo

Atag IG9571MBA - Eco Stand-By Modus; Stand-By Modus; Switching off

Atag IG9571MBA
74 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 16
Switching off
Switching off one cooking zone
Press the on/off button of the cooking zone you want to switch off.
You will hear a beep and the level in the display disappears.
If all cooking zones have been switched off in this way, the hob will
automatically be in the stand-by mode (also refer to
‘stand-by mode’).
Switching off all cooking zones
Press the child lock button to switch off all the cooking zones at the
same time.
You will hear a beep. The red childproof lock indicator next to the child
lock button will blink very slowly.
The induction hob is now in eco stand-by modus
(see also ‘eco stand-by modus’).
Stand-by mode
In stand-by mode the induction hob is switched off. You can switch to
the stand-by mode from the eco stand-by mode, or by switching off all
cooking zones.
From the stand-by mode you can directly start cooking by pressing the
on/off button of the desired cooking zone.
Switching the hob from the eco stand-by mode to the standy-by
mode
The red light next to the child lock button keeps slowly going on and off.
Press the child lock button for a short while to switch to the
stand-by mode.
A single beep will be heard. All lights on the hob are out.
Eco stand-by mode
In the eco stand-by mode the hob is switched off and it uses as little
energy as possible.
The hob can also be switched to the eco stand-by mode from the
stand-by mode and when cooking zones are still active.
Did you know that
The hob uses less than 0,5 Watt in the eco- stand-by mode. That is
even less than in the stand-by mode of the hob.
OPERATION INDUCTION

Table of Contents

Related product manuals