Atag IS 12

Installation & Servicing instructions ATAG iS-Range
57
Annex B Declaration of conformity
CE DECLARATION OF CONFORMITY
Hereby declares ATAG Verwarming Nederland BV that,
the condensing boiler types: ATAG
iS12 iS15 iS18 iS24 iS32 iS40
are in conformity with the provisions of the following EC Directives, including all amendments, and
with national legislation implementing these directives:
Directive Used standards
Gas Appliance Directive 2009/142/EC EN15502-1:2012
EN15502-2;2012
EN60335-1:2011
EN60335-2-102:2010
Boiler E󰀩ciency Directive 92/42/EEC EN677: 1998
EN132031/2:2014
Low Voltage Directive 2014/35/EU EN60335-2-102 :2010
EN60335-1: 2011
EMC Directive 2014/30//EU EN60335-2-102 :2010
EN61000-3-2: 2009
EN61000-3-3: 2008
EN55014-1:2011
EN55014-2:2008
Ecodesign Directive 2009/125/EC EN 15036-1:2006
EN 13203-2: 2014
EN 15502-1: 2012
Labelling Directive 2010/30/EU
Report numbers GAD BED LVD EMC D
141000634 141000634 141000634 141000634
and that the products are in conformity with EC type-examination certicate number E0430, as
stated by KIWA-Gastec Certication BV, Apeldoorn, The Netherlands.
Date : 15 May 2016
Signature :
Full name : Drs. C. Berlo
CEO