EasyManua.ls Logo

Atag KA2512BD - Defrosting and Cleaning; Appliance Defrosting

Atag KA2512BD
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 38
DEFROSTING AND CLEANING THE APPLIANCE
Automatic refrigerator defrosting
This refrigerator does not need defrosting because the ice on the back interior wall is thawed
automatically.
Any accumulated ice will melt when the compressor unit is inactive. Drops will flow through an
opening in the refrigerator rear wall into a tray fitted above the compressor, from where they will
evaporate.
Make sure the opening in the back wall in the refrigerator interior is never blocked by food or any
other object.
If an excessive layer of ice is formed on the rear wall of the refrigerator interior (3–5 mm), switch
off the appliance and defrost the appliance manually.
Defrosting a NoFrost freezer
The No Frost freezer will defrost automatically. Occasional frost that may appear on the walls
will disappear automatically.
Build-up of ice or frost in the freezer compartment can be a result of abnormal use of the
appliance (door opened too frequently and/or too long, door not properly closed etc.). In this
case, unplug the appliance, remove the food from the freezer and protect it from defrosting.
Clean and dry the freezer interior. Before returning the frozen food into the freezer,
switch on the appliance and select the desired setting.
Defrosting the appliance

Related product manuals