What to do if my Atag KU2590A/A01 Refrigerator is leaking water?
If you notice water leaking from your Atag Refrigerator, it could be due to a clogged water discharge opening or water dripping past the water gutter. Try cleaning the opening, for example, using a plastic straw. Alternatively, a thick layer of ice might have built up. In this case, manually defrost the appliance.
Why is my Atag KU2590A/A01 Refrigerator cooling system running constantly?
If the cooling system of your Atag Refrigerator operates continuously for a long period, several factors could be at play. The ambient temperature might be too high, or the door may have been opened too frequently or not closed properly. The door seal might be faulty due to dirt, misalignment, or damage. Putting too much fresh food in at once or insufficient air circulation around the compressor and condenser could also be causes. Ensure sufficient ventilation around the appliance.
Why is there excessive ice build-up in my Atag KU2590A/A01 Refrigerator?
Excessive ice build-up on the back wall of your Atag Refrigerator's interior can occur if the ambient temperature is too high, or if the door has been opened too long or too frequently. It may also happen if the door isn't closing properly or the door seal isn't working as it should. Putting too much fresh food in at once, or insufficient air circulation around the compressor and condenser could also contribute. Avoid placing warm food in the refrigerator.
Why my Atag Refrigerator is not working?
If your Atag Refrigerator is connected to the power mains but isn't working, ensure the power outlet has voltage and that the appliance is switched on.
What does error code E1 or E2 mean on my Atag KU2590A/A01?
If you see error code E1 or E2 displayed on your Atag Refrigerator, it means a sensor is defective. Call the service centre to make an appointment for repair work.
How to stop condensation on the shelf in my Atag Refrigerator?
Condensation on the glass shelf above the fruit and vegetable bin in your Atag Refrigerator can be addressed by ensuring the door is closed and sealed properly. It's also recommended to clean the fruit and vegetable bin more frequently and wipe off any drips. Additionally, pack food in bags or other air-tight packaging.
Why doesn't the door of my Atag KU2590A/A01 open easily?
The door of your Atag Refrigerator may not open easily for a few minutes, but the situation should return to normal shortly, and the door should open easily again.
Why is the cooling system in my Atag Refrigerator running constantly?
If the cooling system of your Atag Refrigerator operates continuously for a long period, it could be due to several reasons. The ambient temperature might be too high, the door may have been opened too long or too frequently, or it might not be closed or sealed properly. Also, too much fresh food might have been put in at the same time, or there might be insufficient air circulation around the compressor and condenser. Check that the ventilation around the appliance is sufficient.
How to prevent ice build-up on the back wall of my Atag KU2590A/A01?
Excessive ice build-up on the back wall of your Atag Refrigerator can occur if the ambient temperature is too high, the door has been opened too long or too frequently, or the door isn't closed or sealed properly. It can also happen if too much fresh food has been added at once, or if there's insufficient air circulation around the compressor and condenser. To address this, avoid placing warm food in the refrigerator and check that the ventilation around the appliance is sufficient.
What to do if my Atag KU2590A/A01 is not working?
If your Atag Refrigerator is connected to the power mains but isn't working, make sure there is voltage in the power outlet and that the appliance is switched on.
General| Brand | Atag |
|---|---|
| Model | KU2590A/A01 |
| Category | Refrigerator |
| Language | English |
To Next Page
