EN 18
Adjusting the temperature of the appliance while the intensive cooling function is
activated will immediately disable the intensive cooling function.
When the intensive cooling function is not manually disabled, the function will be
automatically disabled after about six hours. The temperature then returns to the latest
set temperature.
Do not switch on the intensive cooling function unnecessarily. This will save energy.
Open door alarm
An alarm signal sounds when the appliance door is open for too long. The indicator light flashes
in the display.
Stopping the alarm
1. Close the door.
2. Touch the alarm key to stop the alarm.
▷ The alarm will stop sounding.
When the door is still open after 10 minutes, the appliance will switch to safe mode.
The LED lighting goes off.
OPERATION
To Next Page
Loading...
