EN 41
Problem Cause or remedy:
Temperature display
flashes:
• Door opened too frequently or too long.
• Door not closed correctly (possible impurities on the seal,
misaligned door, damaged seal etc.).
• An extended power failure.
• Too much fresh food inserted at once.
Door is difficult to
open:
• If you are trying to open the freezer door after just having closed
it, this could be difficult to do. As you open the door, some cool
air escapes from the appliance and it is replaced by warm air
from the environment. When this air is cooled, negative pressure
is generated which results in problems as you try to open the
door. After a few minutes, the condition is normalized and the
door can be easily opened again.
LED lighting does not
work:
• If LED lighting does not work, call a service technician.
• Do not attempt a repair of the LED lighting yourself, as there is
danger of contact with high voltage!
VitaLED lighting does
not work:
• If the VitaLED lighting does not work, call a service technician.
Indication of error
code on the display:
• If E appears on the display, call a service technician.
If the above tips do not resolve your problem, call the nearest authorized service centre and state
the type, model, and serial number indicated on the appliance rating plate or label located in the
appliance interior.
OTHER
The rating plate can be found in the appliance interior (see figure).
To Next Page
Loading...
