Atag MadQ/2 - Copying Time Programs; Transferring Time Programs Between Days

Page GB-18
Heating circuit
Push for approx. 3 seconds
Copying of timeprograms (formation of blocks)
6622..55
1155::3300
WWEE.. 2255.. JJUUNN..;;0033
°C
TTIIMMEEPPRROOGGRRAAMMSS
HHCC
TTIIMMEEPPRROOGGRRAAMMSS
MMCC--11
TTIIMMEEPPRROOGGRRAAMMSS
TTIIMMEEPPRROOGGRRAAMMSS
MMCC--22
Enter timeprogram level
Standard display
DDHHWW
TTIIMMEEPPRROOGGRRAAMMSS
select
accept
Example: Unmixed circ.
accept
DDAAYY
CCOOPPYY
2200..00
MMOO--11
0066.. 0000--2222.. 0000
0
246
10
12
18 2220
14 16
24
°C
8
selectCopy
3 sec
With this function the timeprograms of any weekday can be copied to other days
(Mo-Su) or to the complete week (1-7) or to groups such as working days (1-5) or
weekends (6-7).
if necessary select program, if enabled (see page 25)
1) 1)
GB
8A521100_GB.qxd 10.11.2004 12:05 Seite 18