EasyManua.ls Logo

Atag OX6411B - Page 71

Atag OX6411B
76 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 17
CLEANING AND CARE
Door removal
For normal use, the oven door must not be removed but if removal
is necessary, for example, for cleaning purposes, follow these
instructions. CAUTION: The oven door is heavy.
1
Open the door and fl ip open the clips at both hinges
completely.
XU
YU
2
Close the door by approximately 70°. With both
hands, grasp the sides of the oven door at its middle
and pull-lift until the hinges can be taken out.
Door glass removal
The oven door is equipped with thr
ee sheets of glass placed against
each other. These sheets can be removed for cleaning.
1
Remove the two screws on the left and right sides of the
door.
XU
2
Detach the covering and remove glass 1 from the door.
YU
ZU
3
Lift glass 2 and remove the two holder glass rubbers from
the top of the sheet. Clean the sheets with warm water or
washing-up liquid and polish dry them with a soft clean
cloth.
When assembling the inner glass 1, put printing to the lower
dir
ection.

Table of Contents

Related product manuals