Atag SX4511D User Manual

EN 40
Clicking sounds can be heard when the oven is working, particularly
in the defrost setting.
• This is normal.
The circuit breaker switches off regularly.
• Consult a service technician.
The display gives an error code, ERROR XX ...
(XX indicates the number of the error).
• There is a fault in the electronic module. Disconnect the appliance
from the power supply for a few minutes. Then reconnect it and set
the current time.
• Consult a service technician if the error persists.
Storing and repairing the oven
Repairs should only be performed by a qualified service technician.
If maintenance is required, then remove the mains plug from the socket
and contact the ATAG customer service.
Have the following information to hand when you call:
• The model number and serial number (stated on the inside of the
oven door)
• Warranty details
• A clear description of the problem
Choose a clean, dry place if you have to store the oven temporarily,
as dust and moisture can damage the appliance.
SOLVING PROBLEMS

Atag SX4511D Specifications

General

Oven size	Medium
Oven type	Electric
Number of ovens	1
Total oven power	- W
Microwave cooking	-
Number of shelves	1 shelves
Convection cooking	Yes
Oven thermostat range	35 - 100 °C
Auto programs quantity	96
Number of shelf positions	4
Total oven(s) interior capacity	51 L
Maximum temperature (conventional)	100 °C
Door hinge	down
Control type	Rotary, Touch
Display type	TFT
Door material	Glass
Product color	Black, Stainless steel
Control position	Front
Appliance placement	Built-in
Water tank capacity	1.5 L
Number of glass door panels	3
Clock type	Electronic
Timer type	Digital
Energy consumption (conventional)	- kWh

Weight and Dimensions

Depth	547 mm
Width	597 mm
Height	458 mm
Installation compartment depth	550 mm
Installation compartment width	568 mm
Installation compartment height	450 mm