ActionPossible causesProblem
Activate the Auto open option.The Auto open option is not
activated.
The dishes are not dry enough.
Fully load the dishwasher.The dishwasher is not fully
loaded.
Top up with rinse add or
increase the rinse aid dosage.
See the sections Before washing
for the first time and Settings.
Rinse aid needs topping up or
dosage is set too low.
Inactivate the setting TAB
(3-in-1/ All-in-one detergent) and
top up salt and rinse aid.
3-in-1/ All-in-one detergent is
used and the setting TAB
(3-in-1/ All-in-one detergent) is
activated.
Table continued from last page
30
Troubleshooting
To Next Page
Loading...
