Why are there spots left after washing in Atag Dishwasher?
If spots are left on your dishes after washing in Atag Dishwasher, it may be because some substances like lipstick and tea can be difficult to wash off. In such cases, try using a detergent that contains a bleaching agent to help remove these stubborn stains.
Why don't the touch buttons react on my Atag Dishwasher?
If the touch buttons on your Atag Dishwasher aren't responding, wait a moment and try again, especially if you've just opened the door. Ensure the touch buttons are clean and free from dirt or debris; wipe them with a dry or slightly damp cloth. If a specific symbol appears on the display, it might indicate the door isn't open enough; open it until the display lights up, or close the door, wait 30 seconds, and then reopen it. Lastly, check if the child lock (button lock) is activated, and if so, disengage it.
General| Type | Freestanding |
|---|---|
| Noise level | 44 dB |
| Water consumption per cycle | 9.5 L |
| Drying Efficiency Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | Yes |
| Place setting capacity | 14 place settings |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
To Next Page
