Atag VA9011XT - Page 2

Product information
VA3.. VA9011XT..ZT..VA..VA(9)6211Q..R..S..T
MPr 28112005
- 1
-
General information
The machine may be connected to a hot water tap upto 60 °C.
For cleaner and dryer results however, it is advised to connect the machine to a
cold water tap
va =1,3 m
v b=1,6 m
v c =1,4 m (3,6 m with extension set)
v d =1,2 m (3,4 m with extension set)
v e =1,6 m (3,6 m with extension set)
v f =1,2 m (3,2 m with extension set)
Water connection:
v The water connection is ¾”
v Minimal water pressure 0,5 bar (to be tested with a bucket, minimal 8 l/min)
v Maximum water pressure 10 bar
Warmwater recognition:
If during hot rinsing the temperature of the incoming water is higher than 45°C , the
temperature of the hot rinsing is increased to 72°C.
The heat exchanger is not being filled during the drying process.
Weight accessory panels
88001054
88001114
88007087
Maximum heigth 90 cm
with extension 80 cm
Enclosed separately