Atag VA9011XT - Page 9

Product information
VA3.. VA9011XT..ZT..VA..VA(9)6211Q..R..S..T
MPr 28112005
- 8
-
Filling water
If tap is closed:
In case level F1 is not reached after 3½ minutes, the control will stay in this
position. On the display the message appears: ´Check water supply´.
As soon as the tap is opened, the machine will continue running the program.
In case of clogged level chamber or faulty F1
In case of faulty F1 the filling process develops as
follows
v Machine continues filling
v Safety level will be reached
v Machine idles
v After some time the inlet valve will be closed and
the programme continues
This symbol on the inner door indicates that the machine is equipped
with a heat exchanger.
Inlet valve
Outlet valve
F1
After
this, water
supplement
depends on
the
tacho
generator
(load recognition
)
Circulation
pump