EasyManua.ls Logo

Atag XL-W Series - Accessories; Controls

Atag XL-W Series
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
Accessories
Controls
DESCRIPTION SAP CODE
LLH / DHW SENSOR TH/R L PLUS
Sensor for use as T10 Common flow temperature sensor or as T4 Do-
mestic hot water temperature sensor.
Resistance value NTC 10K
3905045
ROOM FAN EXT.GAS VALVE SINGLE BOILER TH/R L PLUS
Relay set to control either an external gas valve or room ventilation.
3905103
BMS BUS MODULE LON TH/R L PLUS 3905120
BMS BUS MODULE BACNET TH/R L PLUS 3905121
BMS BUS MODULE MODBUS TH/R L PLUS 3905122
BMS BUS MODULE KNX TH/R L PLUS 3905123
The BMS BUS Module allows communication between a BMS-system
and the boiler using LON/BACNET/MODBUS/KNX protocol. For each
protocol there is a dedicated accessory.
CLIP-IN 3 ZONES MANAGER TH/R L PLUS
The clip-in 3 zones manager can control 3 mixed heating circuits. It has
connections for 3 flow temperature sensors, 3 heating circuit pumps
and 3 mixing valves. Furthermore there is a programmable volt-free
contact.
3905124
OUTDOOR SENSOR TH/R L PLUS
Resistance value NTC 1K
3905127
ZONE SENSOR TH/R L PLUS
Sensor for use as heating circuit flow temperature sensor. Resistance
value NTC 10K
3905128

Related product manuals