67
Accessories
Hydraulics Single boiler
DESCRIPTION SAP CODE
INAIL KIT SINGLE BOILER WATER TH/R L PLUS
The INAIL kit contains the following components:
Safety thermostat 100°C with manual reset
Maximum water pressure switch
Minimum water pressure switch
Thermometer
Pressure gauge
Safety valve 4.5 bar
3905100
WATER-GAS CONNECTION KIT SINGLE BOILER TH/R L PLUS
Adapters for water and gas connections.
Water connection: G 2” Flat gasket surface to G 1½“ internal
Gas connection: G 1.¼” Flat gasket surface to G 1” internal
3905117
CONNECTION KIT BOILER CH TLPLUS
Kit contains shut off valves for water flow, return and gas connections
and a 6 bar safety valve.
Connections system side:
Water: G 2” Flat gasket surface
Gas: Rp 1.¼”
3905150
CONNECTION KIT BOILER DHW TLPLUS
Kit contains shut off valves for flow, return and gas connection, 3-port
DHW valve and a 6 bar safety valve.
Connections system side:
Water: G 2” Flat gasket surface
DHW: G 1.¼”
Gas: Rp 1.¼”
3905151
LOW LOSS HEADER dT10-20K WALL HUNG TLPLUS
Low loss header kit with bracket for wall fixation, deaerator and flexible
hoses to connect the low loss header to the boiler.
For connection possibilities and dimensional sketch, please see follow-
ing page.
3905173
INSULATION LLH dT10-20K WALL HUNG TLPLUS
Insulation for the low loss header kit 3905173
3905175
To Next Page
Loading...
