Atag ZX6011K - Troubleshooting; Common Issues and Solutions

GB 73
troubleshooting
what if…..
WHAT SHOULD YOU DO?
POSSIBLE CAUSES
IF YOU REALIZE THAT
The oven isn't heating.
• The oven isn't connected to the power
supply.
• The fuse has blown.
• The temperature selected is too low.
• The sensor is faulty
• The thermostat is faulty
• The oven has overheated. It has been put
out of use for safety reasons.
- Connect to power supply.
- Change the fuse, checking that it is 16A.
- Increase the temperature selected.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service
ERR: "V" is displayed
ERR: "M" is displayed
• The door lock is faulty.
• Demande de pyro alors que la porte est
verrouillée.
• The temperature sensor is faulty.
- Contact the After-Sales Service.
- Contact the After-Sales Service
- Contact the After-Sales Service.
The light inside the oven isn't
working.
• The lamp is unusable.
• The oven isn't connected to the power
supply or the fuse has blown..
- Change the bulb.
- Connect to power supply or change
fuse.
Cleaning by pyrolysis has not
occurred.
• The door is not shut properly.
• The door-locking system is faulty.
• The temperature sensor is faulty.
• The plate that detects when the door is
shut is faulty.
- Check the door is properly closed
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.