the "EASY COOK" function
advantages and working principle
The “EASY COOK” feature means you no longer have to set
the temperature or the cooking method.
Your oven automatically works these out for you to give the
best results.
The “EASY COOK” method is done in two stages:
1) Input. The oven uses its electronic scanners to record the
cooking details of each thing you want to cook.
You will notice the oven carrying out this operation because
the right-hand end of the display panel will become busy. This
may take between 5 and 40 minutes to complete.
DO NOT OPEN THE OVEN DOOR DURING THIS STAGE: it will
give a faulty reading.
2) Calculation. The oven works out the cooking time required.
The AUTO symbol appears on the display panel. The oven
shows the amount of cooking time remaining as well as the
actual time of day it will finish. If you want to open the door to
rearrange the food, add more liquid etc, you can.
When cooking finishes a series of beeps is heard.
Cooking straightaway:
Set the selector to “EASY COOK”.
In the display, you will see a selection of dishes.
Using the button choose the one you want
Place the dish in the oven at the level suggested in the display.
Close the door. The oven starts the cooking cycle as the ove-
n's sensors start working and the display panel becomes busy.
The cooking time is displayed.
When cooking ends the oven beeps several times.
ALL COOKING IS DONE WITHOUT PREHEATING THE
OVEN
the "EASY COOK" function
instructions for use
100
To Next Page
Loading...
