how to use your oven
carrying out economical cooking *
The programmer should only display the time and this should
not be flashing.
• Turn the function selector to the " "position. The "ECO"
indicator lights up on the display.
• Place your dish in the oven following the recommendations
shown on the display.
For example: for the " " " position -> oven shelf levels
1 or 2 are recommended.
•Your oven will recommend the optimal temperature for the
chosen cooking mode: 200ºC.
Nevertheless, you may adjust the temperature if you wish by
using the button located under the display.
For example: " " position adjusted to 200ºC.
After these steps, the oven begins to heat up:
The temperature indicator lights up and shows you the tem-
perature rising inside the oven.
You will hear three beeps when the set temperature is rea-
ched.
For optimal "ECO" cooking, do not carry out preheating and do
not open the door.
*This position allows you to make a 20% saving in energy
while at the same time achieving identical cooking results.
The ECO position is used for the energy label.
Following a cooking cycle, the oven's fan conti-
nues to operate for a while afterwards in order to
ensure that everything cools down properly.
89
To Next Page
Loading...
