how to use your oven
setting the time
When the oven is installed
• The display will flash on and off, showing 12:00.
• Adjust the time by turning the button in the + or - direction
(the speed at which you turn the knob varies the time adjust-
ment speed).
The newly adjusted time is automatically recorded after a few
seconds.
-> The display stops flashing
Resetting the time on the clock
Turn the programme selector to "Reset time".
The time display flashes on and off to show you that adjust-
ment is now possible.
To adjust it, turn the knob in the + or - direction to increase or
reduce the time displayed.
After having set the time of your choice, turn the selector to
"ºC".
-> The time display stops flashing.
Time adjustment is not possible when in delayed programming
mode.
If the adjustment is not confirmed by the ºC function
selector, it will be automatically recorded after a few
seconds.
85
To Next Page
Loading...
