3
Handling of this instrument
◇ When measuring a substance harmful to
the human body, be aware of its
properties and wear protective gloves,
mask, etc.
◇ Immediately turn off the power (DC24V) if
the unit begins to overheat, smoke or emit
an abnormal smell. Fire or malfunction
may result if the instrument continues to
be used. Contact your ATAGO Distributor
for an inspection.
◇ Do not attempt to repair, modify, or
disassemble the instrument yourself.
Improper servicing may result in fire,
electrical shock, or burns.
◇ If the instrument is dropped or is
subjected to a strong shock, have it
inspected by an Authorized ATAGO
Service Center.
Fire or malfunction may result if the
instrument is used.
◇ Do not apply water or sample to any part
of the instrument other than the surface of
the prism.
Applying water to any other part of the
instrument may result in a malfunction.
◇ Do not measure very hot or highly acidic
samples. This may damage the prism,
which would result in inaccurate
measurements.
To Next Page
Loading...
Need help?
General
