ATAGO CM-BASEa(A) - Page 5

5
Handling of plug
WARNING
◇ Supply the CM-BASEα with DC24V only
(allowable fluctuation is ±10 %).
Short-circuit, smoke, or fire may occur if
other voltages are used.

◇ Do not use a power cable that is
damaged, cut, broken, or altered. Use
may result in fire, electrical shock, or
burn.
For repair service of the power cable,
contact an Authorized ATAGO Service
Center.

CAUTION
◇ Do not insert or pull out the connector and
plug with wet hands.

Connection of optional component
WARNING
◇ Turn off the power (DC24V) prior to
connecting cables to the individual units.
