3
How you configure your 3G MicroCell is dependent on what equipment you currently use to connect to the Internet.
• If you have either a gateway or a modem and Wi-Fi router, follow OPTION A on page 4.
• If you only have a modem attached directly to your computer, follow OPTION B on page 5.
Step 2: Configuration and Powering Up
• Place your MicroCell within 3 feet of a window, if possible.
• Make sure your MicroCell is at least 1 foot away from your gateway or modem and Wi-Fi router.
• Refer to FAQ 1.4 on page 9 for additional details on product placement.
Step 1: Online Activation
If you haven’t already activated your 3G MicroCell when you purchased it, you must do so now.
1. Launch your web browser and visit:
att.com/3GMicroCell.
2. Locate the Activate my AT&T 3G MicroCell
TM
area on the lower portion of the home page and click on the
applicable link.
3. When prompted, enter your AT&T Online Wireless Account user name and password. If you don’t have one, follow
the on-screen instructions to create one.
4. Follow the remaining on-screen steps until you reach the confirmation screen.
Note: As an added benefit, when placing a 911 call while connected to your 3G MicroCell, the full location address you
provide in your online activation will be sent to local emergency responders. A built-in Global Positioning System (GPS)
feature helps deliver this functionality.
Serial # (S/N): -
Write down your 3G MicroCell’s serial number as you will
need it for online activation and for future reference.
To Next Page
Loading...
Need help?
General
