AT&T 3G MicroCell Quick Start

AT&T 3G MicroCell™
Q
u
ic
k
St
ar
t
Status Indicators (Front of the Device)
Computer
Ethernet
Power
Getting To Know Your Device
Package Contents
AT&T 3G MicroCell™ | AC power adapter | Yellow ethernet cable | Quick Start | User Guide
To view an activation tutorial, visit att.com/3GMicroCell under the “Help“ tab.
Power
Ethernet
GPS
Computer
3G
Before You Begin
Serial Number (S/N) Tip
Write down your MicroCell’s serial number; you’ll
need it for online activation and future reference.
It can be found on the bottom of the device or on
the box label.
Serial # (S/N)
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affi liates in the U.S. and
other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third-party
trademarks mentioned are the property of their respective owners. The use of the word partner does not imply
a partnership relationship between Cisco and any other company. AT&T, the AT&T logo, and AT&T 3G MicroCell
are trademarks of AT&T Knowledge Ventures. Product and service availability is subject to change without notice.
Portions © AT&T Intellectual Property. Portions © Cisco and/or its affi liates. All rights reserved.
February 2012 Part Number 4038348 Rev B
Having Trouble?
1. Have you waited at least 90 minutes?
2. Have you activated your MicroCell online and received the
Online Activation Complete email?
3. Does your MicroCell have a solid GPS light?
4. Is your Internet connection and home network up and
running and connected?
Need More Help?
Refer to the Troubleshooting section in the User Guide,
visit att.com/3GMicroCell-Help, or call AT&T Support at
1-800-331-0500.
• Plan your installation location – your device should be:
– Within three feet of a window to receive a GPS signal for 911 purposes.
– At least one foot away from other wireless broadcasting devices to avoid possible interference.
– Where you can connect your MicroCell to your Internet equipment.
• Plan on 10-15 minutes for equipment setup and online activation. Your device will then need up to
an additional 90 minutes for fi nal device activation, which requires no effort on your part.
• You will need your AT&T wireless phone number/user name or AT&T Access ID, as well as your
password for online activation. If you haven’t set up an AT&T online wireless account, you can do
so while activating your MicroCell online.

AT&T 3G MicroCell Specifications

General

Brand	AT&T
Model	3G MicroCell
Category	Extender
Language	English