If anything is missing or appears to be damaged,
contact AT&T Customer Support at 1.888.334.3787
and enter PIN 88346 for assistance.
Let’s get started.
Start Here!
AT&T 3G MicroCell
TM
Getting Started Guide
Congratulations on the purchase of your new AT&T 3G MicroCell
TM
. The 3G MicroCell provides voice and data service to AT&T 3G
wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum
cellular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office.
• Allow up to 2 hours to have your 3G MicroCell up and running. Your part (online activation and equipment setup)
takes 10-15 minutes. The additional time is for system configuration and 3G service activation. These tasks are
handled by the 3G MicroCell and require no effort on your part.
• In order to activate your 3G MicroCell you will be required to enter your AT&T Online Wireless Account user name
and password. If you have not previously registered for a user name and password, you will be required to do so
during the 3G MicroCell setup.
System Administrators (business customers) see Firewall Specifications on page 5 of the AT&T 3G MicroCell
TM
User Manual.
What’s in the Box?
• Remove the contents of the AT&T 3G MicroCell
TM
package.
• Verify that you received the following:
AT&T 3G MicroCell™
AC Power
Adapter
Yellow
Ethernet Cable
Getting Started Guide
and User Manual
If anything is missing or appears to be damaged,
contact AT&T Customer Support at
1.888.334.3787
and
enter PIN 88346
for assistance.
Start Here!
AT&T 3G MicroCell
TM
Getting Started Guide
C
ongratulations on the purchase of your new AT&T 3G MicroCell
TM
. The 3G MicroCell provides voice and data service to AT&T 3G
wireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum cel-
lular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office.
• Allow
up to two hours
to have your 3G MicroCell up and running. Your part (online activation and equipment setup)
takes 10-15 minutes. The additional time is required for system synchronization between the 3G MicroCell and the
AT&T network.
• In order to activate your 3G MicroCell you will be required to enter your
AT&T myWireless Account user name
and password
(the same account you use to pay your wireless bill online). If you have not previously registered
for a user name and password, you will be required to do so during the 3G MicroCell setup.
What’s in the Box?
•
Remove the contents
of the AT&T 3G MicroCell
TM
package.
•
Verify
that you received the following:
AT&T 3G MicroCell™
AC Power
Adapter
Yellow
Ethernet Cable
Getting Started Guide
and User Manual
To Next Page
Need help?
General
