EasyManua.ls Logo

AT&T 944 - Set Audio Mode; Set the Dial Mode; Set the Flash Time; Turn Hold Reminder on or off

AT&T 944
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
FEATURE SET UP
17
Set Audio Mode
Choose the mode (speakerphone or headset) the phone will automatically
use to make and answer calls when the handset is in the cradle.
1 Press G.
2 Press - until the screen displays AUDIO MODE, then press >.
3 Press - or + to change the setting.
4 Press S to store your selection.
NOTE: If you have programmed headset as the default mode but the
headset is not plugged in, the phone will switch to speakerphone.
Set the Dial Mode
1 Press G.
2 Press - until the screen displays TONE/PULSE, then press >.
3 Press - or + to change the setting.
4 Press S to store your selection.
Set the Flash Time
NOTE: If you are using this phone within the United States, there is no
need to change the Flash Time from the default setting (0.7 seconds).
1 Press G.
2 Press - until the screen displays FLASH TIME, then press >.
3 Press - or + to select the desired setting.
4 Press S to store your selection.
Turn Hold Reminder On or Off
1 Press G.
2 Press - until the screen displays HOLD REMINDER, then press >.
3 Press - or + to change the setting.
4 Press S to store your selection.

Table of Contents

Related product manuals