AT&T BL102-2 User Manual

29
Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. You can
buy accessory handsets (AT&T model BL102-0 | BL102-0S) to expand your
system.
Use a handset to initiate intercom calls.
1. Press MENU/SELECT on the handset in idle mode to
enter the main menu. Press qCID or pDIR to scroll to
Intercom, then press MENU/SELECT.
2. If you have two system handsets, the handset shows
Calling HS X (X represents the handset number). The
destination device rings and shows HS X is calling.
-OR-
If you have more than two system handsets, press qCID
or pDIR to select a device, or use the dialing keys to
enter a device number (1-5). The handset shows Calling
HS X. The destination handset rings and shows HS X is
calling.
To answer an intercom call:
f Press PHONE/FLASH, or /SPEAKER on the called handset. Both
handsets now show Intercom.
To end an intercom call:
3. Press OFF/CANCEL or places the handset back in the telephone base or
charger.
NOTES:
f Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL.
f If the called party does not answer within 100 seconds or if the handset is in use, on a call or out of range, the
calling handset shows No answer. Try again..
f Pressing OFF/CANCEL or MUTE/DELETE temporarily silences the intercom ringer.
f You can only use one pair of handsets to make intercom calls at a time.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is a
two-beep call waiting tone.
• To answer the call, press PHONE/FLASH. The intercom call ends
automatically. The party on the intercom call hears four beeps. Other system
handsets can also answer the incoming call by pressing PHONE/FLASH.
Calling HS X
ECO
HS X is calling
ECO
Intercom
ECO

AT&T BL102-2 Specifications

General

Brand	AT&T
Model	BL102-2
Category	Cordless Telephone
Language	English