50
Smart call blocker
Call block settings
Block list
Add numbers that you want to prevent their calls from ringing through. The
block list stores up to 1,000 entries.
Add a block entry:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in
use. Press qCID or pDIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Block list, and then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Add new entry, then press
MENU/SELECT.
4. When the screen displays Enter number, use the dialing keys to enter a
number (up to 30 digits).
f Press qCID or pDIR to move the cursor to the le or right.
f Press MUTE/DELETE to erase a digit.
f Press and hold MUTE/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a P
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
qCID, pDIR or REDIAL/PAUSE repeatedly to nd the desired number. Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
f The screen shows Number repeated if the number is already in the
block list. You cannot save the same number twice.
6. When the screen displays Enter name, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears. The rst character of every word is capitalized.
f Press qCID or pDIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to store your block entry.
NOTES:
f Numbers saved in your directory can also be saved to the block list.
f If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.
To Next Page
Loading...
Need help?
General
