Directory
32
Create directory entries
Create a new directory entry
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Directory, then press
MENU/SELECT.
3. Press MENU/SELECT to choose Add new entry.
4. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
f Press qCID or pDIR to move the cursor to the le
or right.
f Press MUTE/DELETE to erase a digit.
f Press and hold MUTE/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to enter a 3-second
dialing pause (a P appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE, then qCID or pDIR, or pressing REDIAL/PAUSE repeatedly
to locate the number. Press MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
The display shows Number repeated if the number
is already in the directory. You cannot save the same
number twice.
6. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
f Press qCID or pDIR to move the cursor to the le
or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to store your new directory entry. There is a
conrmation tone and the screen shows Saved. To change the entry later,
see page 35.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as lower case
letters, as shown in the chart on the next page.
Directory
ECO
Add new entry
ECO
Enter number
888-883-2445
ECO
Enter name
Robert Brown
ECO
Enter name
Charlie Johnson
ECO
To Next Page
Loading...
Need help?
General
