64
Smart call blocker
Call block settings
Play your current announcement of screening with caller name:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in
use. Press qCID or pDIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Play annc, then press MENU/SELECT.
4. Press MENU/SELECT again to select w/ Caller name.
Play your current announcement of screening without caller name:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in
use. Press qCID or pDIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Play annc, then press MENU/SELECT.
4. Press qCID or pDIR to scroll to w/o Caller name, then press MENU/SELECT.
Record your name for all screening announcements:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in
use. Press qCID or pDIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press MENU/SELECT to select Rec your name. The system announces,
“Record after the tone. Press 5 when you are done.”
4. Speak towards the handset to record your name. Press 5 to end recording.
To listen to the announcement with your recorded name again, scroll to Play
annc and press MENU/SELECT.
To Next Page
Loading...
Need help?
General
