AT&T BL102-4 User Manual

Telephone settings
16
Telephone settings
Ringer volume
You can set the ringer volume level (1-6) to one of six levels
or turn the ringer o. When the ringer is o, appears on
the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is
a conrmation tone and the screen returns to the
previous menu.
NOTES:
f The handset ringer volume also determines the ringer volume for
intercom calls.
f If the ringer volume is set to off, that handset is silenced for all incoming calls. However, the handset still plays the
paging tone when responding to the handset locator.
f If the ringer volume is set to off, the caller ID will not be announced.
Ringer tone
You can choose one of 10 ringer tones.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to Ringer tone, then press
MENU/SELECT.
4. Press qCID or pDIR to sample each ringer tone.
5. Press MENU/SELECT to save your preference. There is
a confirmation tone and the screen returns to the
previous menu.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
Telephone settings
Ringer volume
ECO
Volume:
ECO
Ringers
ECO
Ringer tone
ECO
Tone: 1
ECO

AT&T BL102-4 Specifications

General

Brand	AT&T
Model	BL102-4
Category	Cordless Telephone
Language	English