Caller ID
40
Caller ID operation
Save a caller ID log entry to the directory
1. When in the caller ID log, press qCID or pDIR to browse.
2. Press MENU/SELECT to select an entry. The screen displays EDIT NUMBER.
3. Use the dialing keys to edit the number.
f Press qCID or pDIR to move the cursor to the left or right.
f Press MUTE/DELETE to backspace and erase a digit.
f Press and hold MUTE/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a P appears).
4. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.
Use the dialing keys (page 31) to edit the name.
f Press qCID or pDIR to move the cursor to the left or right.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
5. Press MENU/SELECT when done. The handset shows Saved.
NOTES:
f You might need to change how a caller ID number is dialed if the entry does not appear in the correct format. Caller ID
numbers might appear with an area code that is not necessary for local calls, or without a 1 that is necessary for long
distance calls (see View dialing options on page 39).
f If the name you received from the telephone service provider is all in capital letters, the first
letter of every word remains a capital letter, while other letters become lower case. However, the next letter after the
prefix “Mac”, “Mc”, or “O’”, is kept as a capital letter. For example, the “D” in “MacDonald” is kept as a capital letter. Another
exception is that “VAN DER” will be changed to “Van der”.
f If the telephone number from the caller ID information has already been saved in the directory under a different name,
the new name will overwrite the old one.
To Next Page
Loading...
Need help?
General
