48
Smart call blocker
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by default.
1. Press CALL BLOCK on the handset when it is not in
use, and then press MENU/SELECT to select
SCB On/Off.
-OR-
Press MENU/SELECT to enter the main menu when the
handset is not in use. Press qCID or pDIR to scroll to
Smart call blk, then press MENU/SELECT twice.
2. Press qCID or pDIR to highlight On or Off, then press
MENU/SELECT to save the setting. You hear a confirmation tone.
NOTE: If you set SCB On/O to O, all settings under Set prole (see below) will be invalid.
Set prole
There are ve prole setting options, which allows you to quickly set up
Smart call blocker.
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in
use. Press qCID or pDIR to scroll to Smart call blk, then press
MENU/SELECT.
2. Press qCID or pDIR to scroll to Set profile, then press
MENU/SELECT.
3. Press qCID or pDIR to select one of the following options, then press
MENU/SELECT.
f Screen unknown - screen any calls without numbers or with numbers
not saved in the Directory, Allow list, or Star name list.
− This prole setting sets the telephone to screen all unknown calls and asks the callers to
say their names before putting the calls through to you. See Screen unknown calls on
page 68.
f Screen robot - screen robocalls.
− This prole setting sets the telephone to screen all unknown calls and asks the callers to
press the pound key (#) before putting the calls through to you. See Screen robocalls
on page 70.
f Allow unknown (default setting) - allow all unknown calls to ring,
except calls with numbers saved in the block list.
− This prole setting sets the telephone to allow all unknown calls to get through and ring.
Calls with numbers saved in the block list will be rejected.
To Next Page
Loading...
Need help?
General
