Telephone operation
24
Telephone operation
Speakerphone
During a call, press /SPEAKER to switch between handsfree
speakerphone and normal handset use. Press OFF/CANCEL
to hang up or return the handset to the telephone base or
charger.
NOTES:
f When you use the speakerphone, the key pad of the handset and the /SPEAKER button
are lit.
f The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you
are using the speakerphone, the call remains in speakerphone mode until you hang up or the battery becomes
depleted.
f After installing a battery into the handset, the screen may show Low battery. If you use the
speakerphone at this time, the battery may become depleted. Follow the instructions in the Battery installation
and charging section on pages 6-7.
Last number redial
Each handset stores the last 10 telephone numbers dialed (up to 30 digits).
To view the 10 most recently dialed numbers:
f To display the most recently called number, press REDIAL/PAUSE.
f To view up to 10 recently called numbers, press REDIAL/PAUSE, then qCID
or pDIR, or press REDIAL/PAUSE repeatedly.
The handset beeps twice at the end of the list. Press OFF/CANCEL to exit.
To redial a number:
f To dial the displayed number, press PHONE/FLASH or
/SPEAKER.
-OR-
f Press PHONE/FLASH or /SPEAKER, then press
REDIAL/PAUSE repeatedly to view the redial memory.
Press MENU/SELECT to dial the displayed number.
To delete a number:
f While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
Speaker 0:00:30
ECO
10:30
PM
11/20
Elapsed time
Redial 1/10
888-883-2445
ECO
To Next Page
Loading...
Need help?
General
