Answering system
73
Answering system settings
4. The screen displays Play [2] Del [3] Rec [7] and it announces, “To play,
press 2. To record, press 7.” Press 3 to delete your recorded announcement.
The handset displays Annc deleted and announces, “Announcement
deleted.”
When your announcement is reset, the system answers calls with the
default announcement, as described above. You cannot delete the default
announcement.
Answer on/o
Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system o, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or o:
Using the telephone base:
• Press /ANSWER ON to turn the answering
system on or o. If the answering system is
turned on, it announces, “Calls will be answered.”
If the answering system is turned o, it
announces, “Calls will not be answered.”
Using a handset:
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to Answer on/off, then
press MENU/SELECT.
4. Press qCID or pDIR to choose On or Off, then
press MENU/SELECT to save the setting. You hear a
confirmation tone.
When the answering system is on, the handset
shows ANS ON.
NOTE: If the answering system is off and there is an incoming call, the system answers
after 10 rings and announces, “Please enter your remote access code.” For more
information about remote access codes, see page 75.
Answering sys
ECO
Answer on/off
ECO
On
ECO
To Next Page
Loading...
Need help?
General
