Telephone settings
18
Telephone settings
LCD language
You can select the language used for all screen displays.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Settings, then press
MENU/SELECT.
3. Press MENU/SELECT to choose LCD language.
4. Press qCID or pDIR to highlight English, Français
or Español, then press MENU/SELECT to conrm.
NOTE: If you accidentally change the LCD language to French or Spanish, you
can reset it back to English without going through the French or Spanish
menus. Press MENU/SELECT in idle mode, then enter *364#. There is a
confirmation tone.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having to
look at the display. When you have an incoming call, the handset and/or base
speaks “Call from...” and the name of the caller based on the directory or caller
ID information. If the caller’s name is private or unknown, the phone number
up to the last 11 digits will be spoken. If the caller’s phone number is also
private or unknown, no information will be spoken.
To turn on/o the caller ID announce on your handset or base:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Caller ID annc, then
press MENU/SELECT.
3. Use qCID or pDIR to select On or Off, then press
MENU/SELECT.
NOTES:
f To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
f This feature does not announce information for call waiting calls.
f It takes at least two rings for the phone to receive caller ID information and announce it.
If the phone is answered before the end of the second ring, the phone won’t have time
to announce the caller’s information.
f Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
f Caller ID announce is available in English only.
Telephone settings
LCD language
ECO
English
ECO
Caller ID annc
ECO
On
ECO
To Next Page
Loading...
Need help?
General
