15
Telephone operation
Last number redial
The telephone stores the last telephone number dialed (up to 32 digits).
To redial a number:
To display the most recently called number, press
REDIAL/PAUSE when the telephone is not in use.
Li the handset or press SPEAKER to call.
-OR-
Li the handset or press SPEAKER.
Press REDIAL/PAUSE to dial the number.
To delete a redial entry:
While the screen displays the redial number, press DELETE X to delete
the number from the redial memory. The screen shows Deleted with a
confirmation tone.
NOTES:
The screen shows only the last 15 digits if the number has more than 15 digits.
If the redial list is empty, you will see Redial empty on the screen and hear an error tone when
you press REDIAL/PAUSE.
Equalizer
The telephone equalizer enables you to change the quality of the audio to
best suit your hearing.
While on a call, or listening to a message or announcement, press
/EQUALIZER to select one of the four equalizer settings, Natural (default
setting), Treble 1, Treble 2 or Bass. The screen shows EQ changed to Natural,
EQ changed to Treble 1, EQ changed to Treble 2 or EQ changed to Bass,
respectively. The current setting shows on the screen for 2 seconds.
NOTES:
The current equalizer setting remains unchanged until a new setting is selected.
If you press /EQUALIZER in idle mode, the telephone shows To change EQ set during call
with an error tone.
1.
2.
1.
2.
Telephone operation
Redial
885-883-2445
To Next Page
Loading...
Need help?
General
