AT&T CL4940 Manual

4
Getting started
Install the telephone, as shown below.
The telephone is ready for tabletop use. If you want to change to wall-mounting,
see Installation options on page 6 for details.
Telephone installation
Plug one end of the coiled handset cord into the handset jack on the le side
of the telephone base. Plug the other end into the jack on the bottom of the
handset.
1.
Plug one end of the telephone line cord into the telephone line jack on the
bottom of the telephone base. Route the telephone line cord through the
slot. Plug the other end of the telephone line cord into a telephone wall jack
or a DSL lter.
Plug the power adapter into an electrical outlet not controlled by a
wall switch.
2.
3.
DSL lter (not included)
is required if you
have DSL high-speed
Internet service.
Telephone wall jack
Route the power adapter
cord and the telephone line
cord through the slots.
Electrical outlet
not controlled by
a wall switch

AT&T CL4940 Specifications

General

Type	Analog telephone
Answering machine	Yes
Mounting type	Wall
Product color	White
Languages support	ENG, ESP
Dialer location	Base
Phonebook capacity	25 entries
Call log entries	50
Wireless connection	No