15
Telephone settings
Handset settings
Rename handset
You can create a handset name for each system handset.
When the handset is idle, press MENU/SELECT.
Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
Use qCID or pDIR to scroll to >Rename handset, then press
MENU/SELECT.
Change the handset name when prompted.
Press qCID or pDIR to move the cursor to the left or right.
Use the dialing keys to enter a name (up to 11 characters).
Each time you press a key, a character on that key appears. Additional key
presses produce other characters on that key. See the chart on page 33.
Press MUTE/DELETE to backspace and delete characters.
Press and hold MUTE/DELETE to delete all characters.
Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
�ey tone
The handset is set to beep with each key press. You can adjust the key tone
volume or turn it off. If you turn off the key tone, there are no beeps when you
press keys.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >�ey tone, then press
MENU/SELECT.
4. Use qCID or pDIR to select the desired volume or Off.
5. Press MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
1.
2.
3.
4.
•
•
•
•
5.
Clr voicemail
>
Rename handset
p
q
RENAME HANDSET
HANDSET____
Rename handset
>
Key tone
p
q
KEY TONE
p
q
To Next Page
Loading...
Need help?
General
