Multiple handset use
27
Push-to-talk (PTT)
You can directly broadcast messages to the speakerphone of any
handset. Any handset you call can respond by pressing the PUSH
TO TAL� key to begin two-way communication.
While talking to another device, hold down PUSH TO TAL� and
release when you are finished speaking, so that the other person can respond.
Only one device can talk at a time.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other devices cannot use the
intercom feature.
Turn PTT on or off
1. Press PUSH TO TAL� when the handset is not in use.
The PUSH TO TAL� menu displays.
2. Press qCID or pDIR to highlight
>
PTT On/Off, then press
MENU/SELECT.
3. Press qCID or pDIR to choose >On or >Off, then press
MENU/SELECT.
•
•
•
•
PTT
PUSH TO TALK
>PTT On/Off
p
q
PTT call to a single handset
1. There are a few ways to begin a PTT call to a single handset.
When the handset is not in use:
If you have a two-handset system, press and hold PUSH
TO TAL�.
If you have more than two handsets, press PUSH TO TAL�.
Then, use the dialing keys to enter the destination handset number.
-OR-
Press qCID or pDIR to highlight the destination handset number and then
press MENU/SELECT or PUSH TO TAL�.
Your handset screen shows Connecting to HANDSET X...
(X
represents the destination handset number)
for a few seconds.
When the connection is made, both your and the destination
handset screens display Press and hold [PTT] to talk.
2. Press and hold PUSH TO TAL� on your handset. A chirp
indicates your microphone is on. Speak towards the handset. Your voice is
•
•
PUSH TO TALK
>Handset X
p
q
Press and hold
[PTT] to talk
To Next Page
Loading...
Need help?
General
