11
Telephone settings
Handset settings
Voice language
You can select the voice language (English or French) to be used for the voice
prompts in your answering system or caller ID announce.
1. Press MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to >Settings, then press MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Voice language, then press MENU/SELECT.
4. Press MENU/SELECT to choose >Answering sys, then press MENU/SELECT.
-OR-
Use qCID or pDIR to scroll to >Caller ID annc, then press MENU/SELECT.
5. Press qCID or pDIR to choose >English or >Français, then press
MENU/SELECT to confirm your selection. You hear a confirmation tone.
Caller ID announce
The caller ID announce feature lets you know who’s calling without having to
look at the display.
To turn on/off the caller ID announce on your handset or base:
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Settings, then press MENU/SELECT.
3. Use
qCID or pDIR to scroll to >Caller ID annc, then press MENU/SELECT.
4. Use
qCID or pDIR to highlight the desired option, then press MENU/SELECT.
Set all On/Off - Change the setting for the base and all handsets.
Local handset - Change the setting for that handset only.
Base - Change the setting for the telephone base only.
5. Use qCID or pDIR to highlight >On or >Off, then press MENU/SELECT.
NOTES:
To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
