Directory
25
Speed dial
The telephone system has 9 speed dial locations (2-9, 0) and a voicemail access
location 1 where you can store the telephone numbers you wish
to dial more quickly. You can store up to 30 digits in each location. Speed dial
assignments can only be selected from the existing directory entries.
The voicemail access number must be manually entered. In the directory, speed
dial locations are indicated by their number on the bottom right hand corner of
the entry.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial location (2-9, 0), then
press MENU/SELECT. The screen briefly shows Copy from Directory... then
enters your directory list.
5. Press qCID or pDIR to scroll to the phone number you wish to assign to the
selected speed dial location.
6. Press
MENU/SELECT to save.
Assign your speed dial voicemail number
See the Set speed dial voicemail number section on page 12 for instructions
on assigning your speed dial voicemail number.
Make a call using speed dial
When in idle mode, press and hold the dialing key (2-9, 0) corresponding to the
assigned location you wish to call.
Check your voicemail using speed dial
Press and hold the 1 key on your handset to dial your voicemail number.
To Next Page
Loading...
Need help?
General
