Telephone settings
14
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Settings, then press MENU/SELECT.
3. Use
qCID or pDIR to scroll to >Dial mode, then press MENU/SELECT.
4. Use
qCID or pDIR to highlight >Touch-tone or >Pulse, then press MENU/SELECT.
QUIET mode
When QUIET mode is turned on, the telephone silences all sounds (except the
handset locator paging tone) during the set period of time (1-12 hours). After
you turn on QUIET mode, this feature activates immediately and the answering
system turns on automatically. When QUIET mode is on, the answering system
takes calls and records messages without broadcasting them.
To turn QUIET mode on:
1.
Press and hold QUIET # in idle mode to enter the QUIET mode setting
screen. The screen shows Quiet: _ _ hours (1-12 hours).
2. Use the dialing keys to enter the desired number of hours (1-12) you would
like to turn on QUIET mode, then press MENU/SELECT.
To turn QUIET mode off:
While QUIET mode is on, press and hold QUIET #.
NOTES:
If you change the base ringer, handset ringer, ringer volume, key tone, or caller ID announce features
when QUIET mode is on, the sample plays but the feature is still muted after saving the setting.
After QUIET mode is turned off or the set period of time has expired, all muted features will be
activated again.
The PTT function is not available when QUIET mode is on.
Intercom is available during QUIET mode, but the handset will not ring.
•
•
•
•
•
To Next Page
Loading...
Need help?
General
