19
Intercom
Use the intercom feature for conversations between two handsets. You can buy
extra accessory handsets (AT&T model CL80143/CL80173/CL80183/CL80193)
to expand your system.
Use a handset to initiate intercom calls and transfer calls.
1. Press MENU/SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT.
If you have a two-handset system, your handset screen shows Calling
other handset.
If you have more than two handsets, your screen shows INTERCOM TO:
Press qCID or pDIR to scroll to the desired handset and press
MENU/SELECT. Your handset screen shows Calling HANDSET X or
Calling all handsets.
The other handset(s) rings and shows Other handset is calling,
HANDSET X is calling, or HANDSET X is calling all (X represents the
handset number).
2. To answer the intercom call, press
PHONE/FLASH, /SPEAKER or any
dialing key (0-9, TONE , or #) on any called handset.
3.
To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger. The other party hears four
beeps. Both handsets display Intercom ended.
•
•
Multiple handset use
To Next Page
Loading...
Need help?
General
