10
Handset settings
Use the menu to change the telephone settings.
1. Press MENU/SELECT on the handset when it is not
in use to enter the main menu.
2. Press qCID or pDIR to scroll to the feature to be
changed. When scrolling through the menu, the >
symbol indicates the chosen menu item.
3. Press MENU/SELECT to select the chosen item.
NOTE: Press to cancel an operation, back up to the previous
menu or exit the menu display. Press and hold to return to
idle mode.
Ringer volume
You can set the ringer volume level to one of six levels or turn the
ringer off. When the ringer is off, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference.
NOTE: The handset ringer volume also determines the ringer volume for
intercom calls.
Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Ringers, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Ringer tone, then press
MENU/SELECT.
4. Press qCID or pDIR to sample each ringer tone.
5. Press MENU/SELECT to save your preference.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
Telephone settings
>Play messages
Answering sys
To Next Page
Loading...
Need help?
General
