Answering system
48
About the answering system
Call screening
To screen a call at the telephone base:
If the answering system and call screening are on, the
announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while a message is being recorded:
Press pVOLUME or qVOLUME on the telephone base to adjust the
call screening volume.
Press /PLAY/STOP to temporarily silence the call screening.
Press /PLAY/STOP to temporarily turn on the call screening if
call screening is set to off.
To screen a call at the handset:
While a message is being recorded, the handset shows,
To screen call, press [SELECT]. Press MENU/SELECT to screen
the call.
Options while a message is being recorded:
Press qCID/VOLUME or pDIR/VOLUME on the handset to adjust
the call screening volume.
Press to temporarily silence the call screening.
Press MENU/SELECT to temporarily turn on the call screening if
call screening is set to off.
Press /SPEAKERSPEAKER to broadcast the announcement and the
incoming message through the speakerphone. Press again to turn
off the speakerphone.
Call intercept
While screening a call, you can stop recording and speak to the caller
by pressing on the handset.
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
