EasyManua.ls Logo

AT&T CL82215 - Basic Call Handling Procedures

AT&T CL82215
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Directory
The directory can store up to 50 entries, which are shared by all
system handsets.
Create a new directory entry
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press qCID or pDIR to scroll to Directory, then press
MENU/SELECT.
3. PressPress qCID or pDIR to scroll to Add contact, then presspress
MENU/SELECT.
4. Use the dialing keys to enter a telephone number (up to 30
digits) when prompted.
Press qCID or pDIR to move the cursor to the left or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second dialing
pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE,
then qCID, pDIR or pressing REDIAL/PAUSE repeatedly to locate
the number. Press MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
6. Use the dialing keys keys to enter a name (up to 15 characters) when
prompted. Press a key repeatedly until the desired character
shows on the screen.
Each time you press a key, the character on that key appears.
Additional key presses produce other characters on that key.
Press qCID or pDIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to store your new directory entry.
Directory
29

Table of Contents

Other manuals for AT&T CL82215

Related product manuals