11
Telephone settings
Handset settings
Set date/time
The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week
can be calculated from the caller ID information. You can turn
off the date and time settings of the caller ID service and set the
date and time manually.
1. When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press qCID or pDIR to scroll to Set date/time and then press
MENU/SELECT.
3. Press qCID or pDIR to select the month, then press
MENU/SELECT, or enter the number using the dialing keys.
4. Press qCID or pDIR to select the day, then press MENU/SELECT,
or enter the number using the dialing keys.
5. Press qCID or pDIR to select the year, or enter the number using
the dialing keys, then press MENU/SELECT to move on to set
the time.
6. Press qCID or pDIR to select the hour, then press MENU/SELECT,
or enter the number using the dialing keys.
7. Press qCID or pDIR to select the minute, then press
MENU/SELECT, or enter the number using the dialing keys.
8. Press qCID or pDIR to select AM or PM, or press 2 for AM or 7
for PM. Press MENU/SELECT to confirm.
NOTE: If the clock is not set when a message is recorded, the system announces,
“Time and day not set,” before it plays the message.
To Next Page
Loading...
Need help?
General
