16
Operation
Steps
Redial
Press REDIAL repeatedly to select the desired entry ->
PHONE/FLASH or /SPEAKER to call.
Volume control
Using a cordless handset:
Press q CID/VOL to decrease or press p DIR/VOL to increase
the listening volume during a call.
Using the telephone base:
Press q/VOLUME to decrease or press p/VOLUME to
increase the listening volume.
Call waiting
(Requires
subscription
from telephone)
f Press
PHONE/FLASH to put current call on hold and to
take the new call.
f Press
PHONE/FLASH at any time to switch back and
forth between calls.
Join a call in
progress
(Use up to two
system handsets
at a time on an
outside call.)
f When a handset is already on a call, press
PHONE/FLASH or /SPEAKER on another handset to
join the call.
f Press or place the handset in the
telephone base or handset charger to exit the call. The call
continues until all handsets hang up.
Intercom
(Use for
conversations
between two
handsets.)
f Press MENU -> or -> Intercom -> SELECT.
f If you have two handsets only, the destination handset
rings.
f If you have more than two handsets or devices, press
or to scroll to the desired device -> SELECT. The
destination handset rings.
f To answer the intercom call, press
PHONE/FLASH,
/SPEAKER or any dialing keys (0-9, TONE or #) on the
destination handset.
f To end the intercom call, press or place
the handset back in the telephone base or charger.
Operate
To Next Page
Loading...
Need help?
Technical Specifications
Power
Battery
