AT&T CL82450 - Multiple Handset Use; Handset Locator; Join a Call in Progress

26
Multiple handset use
Handset locator
The handset locator feature is useful if you misplace any handsets.
To start the paging tone:
Press /HANDSET LOCATOR at the telephone base to
start the paging tone on all handsets for 60 seconds.
NOTE: If you press OFF/CLEAR or MUTE/DELETE on a handset, the
ringer of that handset stops, but the paging to the rest of the
handsets continues.
To stop the paging tone:
Press PHONE/FLASH, /SPEA�ERSPEA�ER, or any dial pad key
(0-9, TONE , or #) on the handset(s).
-OR-
Press /HANDSET LOCATOR on the telephone base.
Join a call in progress
If a handset is already on a call and you would like to join the call, press
PHONE/FLASH or /SPEA�ERSPEA�ER on another handset.
Press OFF/CLEAR or place the handset in the telephone base or charger to
end the call. The call does not end until all handsets hang up.
NOTE: You can use up to four system handsets at the same time on an outside call.
•
•
Multiple handset use
**Paging**