46
Base message counter displays
The base message counter shows the total number of answering system
messages. See the table below for other message counter displays.
Message counter displays
0
No messages.
0 (flashing)
You need to set the clock (page 12).
1-99
Total number of old messages and memos, or message number
currently playing during old message playback.
1-99 (flashing)
Total number of messages and memos. The number flashes when
there are new or missed messages.
After a power failure, the number in the message counter flashes
to indicate that you need to set the clock.
1-99 & F
(alternating)
Memory is full. You must delete some messages before recording
new messages.
- -
The system is answering a call, or someone is trying to reach
it remotely.
The system is in program mode.
0-6
Shows for two seconds while adjusting the telephone base
ringer volume.
1-8
Shows for two seconds while adjusting the telephone base
speaker volume.
Answering system
To Next Page
Loading...
